#something like the following needs to be inside your apache httpd.conf fileLoadModule php5_module modules/libphp5.so
<FilesMatch \.php$>SetHandler application/x-httpd-php</FilesMatch>
## This is the main Apache HTTP server configuration file. It contains the# configuration directives that give the server its instructions.# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.# In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html># for a discussion of each configuration directive.## Do NOT simply read the instructions in here without understanding# what they do. They're here only as hints or reminders. If you are unsure# consult the online docs. You have been warned. ## Configuration and logfile names: If the filenames you specify for many# of the server's control files begin with "/" (or "drive:/" for Win32), the# server will use that explicit path. If the filenames do *not* begin# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"# with ServerRoot set to "c:/Apache2" will be interpreted by the# server as "c:/Apache2/logs/foo.log".## NOTE: Where filenames are specified, you must use forward slashes# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").# If a drive letter is omitted, the drive on which httpd.exe is located# will be used by default. It is recommended that you always supply# an explicit drive letter in absolute paths to avoid confusion.## ServerRoot: The top of the directory tree under which the server's# configuration, error, and log files are kept.## Do not add a slash at the end of the directory path. If you point# ServerRoot at a non-local disk, be sure to point the LockFile directive# at a local disk. If you wish to share the same ServerRoot for multiple# httpd daemons, you will need to change at least LockFile and PidFile.#ServerRoot "c:/Apache2"## Listen: Allows you to bind Apache to specific IP addresses and/or# ports, instead of the default. See also the <VirtualHost># directive.## Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses.##Listen 12.34.56.78:80Listen 80## Dynamic Shared Object (DSO) Support## To be able to use the functionality of a module which was built as a DSO you# have to place corresponding `LoadModule' lines at this location so the# directives contained in it are actually available _before_ they are used.# Statically compiled modules (those listed by `httpd -l') do not need# to be loaded here.## Example:# LoadModule foo_module modules/mod_foo.so#LoadModule actions_module modules/mod_actions.soLoadModule alias_module modules/mod_alias.soLoadModule asis_module modules/mod_asis.soLoadModule auth_basic_module modules/mod_auth_basic.so#LoadModule auth_digest_module modules/mod_auth_digest.so#LoadModule authn_alias_module modules/mod_authn_alias.so#LoadModule authn_anon_module modules/mod_authn_anon.so#LoadModule authn_dbd_module modules/mod_authn_dbd.so#LoadModule authn_dbm_module modules/mod_authn_dbm.soLoadModule authn_default_module modules/mod_authn_default.soLoadModule authn_file_module modules/mod_authn_file.so#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so#LoadModule authz_dbm_module modules/mod_authz_dbm.soLoadModule authz_default_module modules/mod_authz_default.soLoadModule authz_groupfile_module modules/mod_authz_groupfile.soLoadModule authz_host_module modules/mod_authz_host.so#LoadModule authz_owner_module modules/mod_authz_owner.soLoadModule authz_user_module modules/mod_authz_user.soLoadModule autoindex_module modules/mod_autoindex.so#LoadModule cache_module modules/mod_cache.so#LoadModule cern_meta_module modules/mod_cern_meta.soLoadModule cgi_module modules/mod_cgi.so#LoadModule charset_lite_module modules/mod_charset_lite.so#LoadModule dav_module modules/mod_dav.so#LoadModule dav_fs_module modules/mod_dav_fs.so#LoadModule dav_lock_module modules/mod_dav_lock.so#LoadModule dbd_module modules/mod_dbd.so#LoadModule deflate_module modules/mod_deflate.soLoadModule dir_module modules/mod_dir.so#LoadModule disk_cache_module modules/mod_disk_cache.so#LoadModule dumpio_module modules/mod_dumpio.soLoadModule env_module modules/mod_env.so#LoadModule expires_module modules/mod_expires.so#LoadModule ext_filter_module modules/mod_ext_filter.so#LoadModule file_cache_module modules/mod_file_cache.so#LoadModule filter_module modules/mod_filter.so#LoadModule headers_module modules/mod_headers.so#LoadModule ident_module modules/mod_ident.so#LoadModule imagemap_module modules/mod_imagemap.soLoadModule include_module modules/mod_include.so#LoadModule info_module modules/mod_info.soLoadModule isapi_module modules/mod_isapi.so#LoadModule ldap_module modules/mod_ldap.so#LoadModule logio_module modules/mod_logio.soLoadModule log_config_module modules/mod_log_config.so#LoadModule log_forensic_module modules/mod_log_forensic.so#LoadModule mem_cache_module modules/mod_mem_cache.soLoadModule mime_module modules/mod_mime.so#LoadModule mime_magic_module modules/mod_mime_magic.soLoadModule negotiation_module modules/mod_negotiation.so#LoadModule proxy_module modules/mod_proxy.so#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so#LoadModule proxy_connect_module modules/mod_proxy_connect.so#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so#LoadModule proxy_http_module modules/mod_proxy_http.so#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so#LoadModule reqtimeout_module modules/mod_reqtimeout.so#LoadModule rewrite_module modules/mod_rewrite.soLoadModule setenvif_module modules/mod_setenvif.so#LoadModule speling_module modules/mod_speling.so#LoadModule ssl_module modules/mod_ssl.so#LoadModule status_module modules/mod_status.so#LoadModule substitute_module modules/mod_substitute.so#LoadModule unique_id_module modules/mod_unique_id.so#LoadModule userdir_module modules/mod_userdir.so#LoadModule usertrack_module modules/mod_usertrack.so#LoadModule version_module modules/mod_version.so#LoadModule vhost_alias_module modules/mod_vhost_alias.so<IfModule !mpm_netware_module><IfModule !mpm_winnt_module>## If you wish httpd to run as a different user or group, you must run# httpd as root initially and it will switch. ## User/Group: The name (or #number) of the user/group to run httpd as.# It is usually good practice to create a dedicated user and group for# running httpd, as with most system services.#User daemonGroup daemon</IfModule></IfModule># 'Main' server configuration## The directives in this section set up the values used by the 'main'# server, which responds to any requests that aren't handled by a# <VirtualHost> definition. These values also provide defaults for# any <VirtualHost> containers you may define later in the file.## All of these directives may appear inside <VirtualHost> containers,# in which case these default settings will be overridden for the# virtual host being defined.### ServerAdmin: Your address, where problems with the server should be# e-mailed. This address appears on some server-generated pages, such# as error documents. e.g. admin@your-domain.com#ServerAdmin admin@example.com## ServerName gives the name and port that the server uses to identify itself.# This can often be determined automatically, but we recommend you specify# it explicitly to prevent problems during startup.## If your host doesn't have a registered DNS name, enter its IP address here.#ServerName 31.172.252.26## DocumentRoot: The directory out of which you will serve your# documents. By default, all requests are taken from this directory, but# symbolic links and aliases may be used to point to other locations.#DocumentRoot "c:/Apache2/htdocs"## Each directory to which Apache has access can be configured with respect# to which services and features are allowed and/or disabled in that# directory (and its subdirectories). ## First, we configure the "default" to be a very restrictive set of # features. #<Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all</Directory>## Note that from this point forward you must specifically allow# particular features to be enabled - so if something's not working as# you might expect, make sure that you have specifically enabled it# below.### This should be changed to whatever you set DocumentRoot to.#<Directory "c:/Apache2/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all</Directory>## DirectoryIndex: sets the file that Apache will serve if a directory# is requested.#<IfModule dir_module> DirectoryIndex index.html index.php</IfModule>## The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. #<FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All</FilesMatch>## ErrorLog: The location of the error log file.# If you do not specify an ErrorLog directive within a <VirtualHost># container, error messages relating to that virtual host will be# logged here. If you *do* define an error logfile for a <VirtualHost># container, that host's errors will be logged there and not here.#ErrorLog "logs/error.log"## LogLevel: Control the number of messages logged to the error_log.# Possible values include: debug, info, notice, warn, error, crit,# alert, emerg.#LogLevel warn<IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access.log" combined</IfModule><IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "c:/Apache2/cgi-bin/"</IfModule><IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock</IfModule>## "c:/Apache2/cgi-bin" should be changed to whatever your ScriptAliased# CGI directory exists, if you have that configured.#<Directory "c:/Apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all</Directory>## DefaultType: the default MIME type the server will use for a document# if it cannot otherwise determine one, such as from filename extensions.# If your server contains mostly text or HTML documents, "text/plain" is# a good value. If most of your content is binary, such as applications# or images, you may want to use "application/octet-stream" instead to# keep browsers from trying to display binary files as though they are# text.#DefaultType text/plain<IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml</IfModule>## The mod_mime_magic module allows the server to use various hints from the# contents of the file itself to determine its type. The MIMEMagicFile# directive tells the module where the hint definitions are located.##MIMEMagicFile conf/magic## Customizable error responses come in three flavors:# 1) plain text 2) local redirects 3) external redirects## Some examples:#ErrorDocument 500 "The server made a boo boo."#ErrorDocument 404 /missing.html#ErrorDocument 404 "/cgi-bin/missing_handler.pl"#ErrorDocument 402 http://www.example.com/subscription_info.html### MaxRanges: Maximum number of Ranges in a request before# returning the entire resource, or 0 for unlimited# Default setting is to accept 200 Ranges#MaxRanges 0## EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver# files. This usually improves server performance, but must# be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise# broken on your system.##EnableMMAP off#EnableSendfile off# Supplemental configuration## The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary.# Server-pool management (MPM specific)#Include conf/extra/httpd-mpm.conf# Multi-language error messages#Include conf/extra/httpd-multilang-errordoc.conf# Fancy directory listings#Include conf/extra/httpd-autoindex.conf# Language settings#Include conf/extra/httpd-languages.conf# User home directories#Include conf/extra/httpd-userdir.conf# Real-time info on requests and configuration#Include conf/extra/httpd-info.conf# Virtual hosts#Include conf/extra/httpd-vhosts.conf# Local access to the Apache HTTP Server Manual#Include conf/extra/httpd-manual.conf# Distributed authoring and versioning (WebDAV)#Include conf/extra/httpd-dav.conf# Various default settings#Include conf/extra/httpd-default.conf# Secure (SSL/TLS) connections#Include conf/extra/httpd-ssl.conf## Note: The following must must be present to support# starting without SSL on platforms with no /dev/random equivalent# but a statically compiled-in mod_ssl.#<IfModule ssl_module>SSLRandomSeed startup builtinSSLRandomSeed connect builtin</IfModule>#BEGIN PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALLPHPIniDir "C:\PHP\"LoadModule php5_module "C:\PHP\php5apache2_2.dll"#END PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL<FilesMatch \.php$>SetHandler application/x-httpd-php</FilesMatch>
[PHP];;;;;;;;;;;;;;;;;;;; About php.ini ;;;;;;;;;;;;;;;;;;;;; PHP's initialization file, generally called php.ini, is responsible for; configuring many of the aspects of PHP's behavior.; PHP attempts to find and load this configuration from a number of locations.; The following is a summary of its search order:; 1. SAPI module specific location.; 2. The PHPRC environment variable. (As of PHP 5.2.0); 3. A number of predefined registry keys on Windows (As of PHP 5.2.0); 4. Current working directory (except CLI); 5. The web server's directory (for SAPI modules), or directory of PHP; (otherwise in Windows); 6. The directory from the --with-config-file-path compile time option, or the; Windows directory (C:\windows or C:\winnt); See the PHP docs for more specific information.; http://php.net/configuration.file; The syntax of the file is extremely simple. Whitespace and Lines; beginning with a semicolon are silently ignored (as you probably guessed).; Section headers (e.g. [Foo]) are also silently ignored, even though; they might mean something in the future.; Directives following the section heading [PATH=/www/mysite] only; apply to PHP files in the /www/mysite directory. Directives; following the section heading [HOST=www.example.com] only apply to; PHP files served from www.example.com. Directives set in these; special sections cannot be overridden by user-defined INI files or; at runtime. Currently, [PATH=] and [HOST=] sections only work under; CGI/FastCGI.; http://php.net/ini.sections; Directives are specified using the following syntax:; directive = value; Directive names are *case sensitive* - foo=bar is different from FOO=bar.; Directives are variables used to configure PHP or PHP extensions.; There is no name validation. If PHP can't find an expected; directive because it is not set or is mistyped, a default value will be used.; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one; of the INI constants (On, Off, True, False, Yes, No and None) or an expression; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a; previously set variable or directive (e.g. ${foo}); Expressions in the INI file are limited to bitwise operators and parentheses:; | bitwise OR; ^ bitwise XOR; & bitwise AND; ~ bitwise NOT; ! boolean NOT; Boolean flags can be turned on using the values 1, On, True or Yes.; They can be turned off using the values 0, Off, False or No.; An empty string can be denoted by simply not writing anything after the equal; sign, or by using the None keyword:; foo = ; sets foo to an empty string; foo = None ; sets foo to an empty string; foo = "None" ; sets foo to the string 'None'; If you use constants in your value, and these constants belong to a; dynamically loaded extension (either a PHP extension or a Zend extension),; you may only use these constants *after* the line that loads the extension.;;;;;;;;;;;;;;;;;;;; About this file ;;;;;;;;;;;;;;;;;;;;; PHP comes packaged with two INI files. One that is recommended to be used; in production environments and one that is recommended to be used in; development environments.; php.ini-production contains settings which hold security, performance and; best practices at its core. But please be aware, these settings may break; compatibility with older or less security conscience applications. We; recommending using the production ini in production and testing environments.; php.ini-development is very similar to its production variant, except it's; much more verbose when it comes to errors. We recommending using the; development version only in development environments as errors shown to; application users can inadvertently leak otherwise secure information.;;;;;;;;;;;;;;;;;;;; Quick Reference ;;;;;;;;;;;;;;;;;;;;; The following are all the settings which are different in either the production; or development versions of the INIs with respect to PHP's default behavior.; Please see the actual settings later in the document for more details as to why; we recommend these changes in PHP's behavior.; allow_call_time_pass_reference; Default Value: On; Development Value: Off; Production Value: Off; display_errors; Default Value: On; Development Value: On; Production Value: Off; display_startup_errors; Default Value: Off; Development Value: On; Production Value: Off; error_reporting; Default Value: E_ALL & ~E_NOTICE; Development Value: E_ALL | E_STRICT; Production Value: E_ALL & ~E_DEPRECATED; html_errors; Default Value: On; Development Value: On; Production value: Off; log_errors; Default Value: Off; Development Value: On; Production Value: On; magic_quotes_gpc; Default Value: On; Development Value: Off; Production Value: Off; max_input_time; Default Value: -1 (Unlimited); Development Value: 60 (60 seconds); Production Value: 60 (60 seconds); output_buffering; Default Value: Off; Development Value: 4096; Production Value: 4096; register_argc_argv; Default Value: On; Development Value: Off; Production Value: Off; register_long_arrays; Default Value: On; Development Value: Off; Production Value: Off; request_order; Default Value: None; Development Value: "GP"; Production Value: "GP"; session.bug_compat_42; Default Value: On; Development Value: On; Production Value: Off; session.bug_compat_warn; Default Value: On; Development Value: On; Production Value: Off; session.gc_divisor; Default Value: 100; Development Value: 1000; Production Value: 1000; session.hash_bits_per_character; Default Value: 4; Development Value: 5; Production Value: 5; short_open_tag; Default Value: On; Development Value: Off; Production Value: Off; track_errors; Default Value: Off; Development Value: On; Production Value: Off; url_rewriter.tags; Default Value: "a=href,area=href,frame=src,form=,fieldset="; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"; variables_order; Default Value: "EGPCS"; Development Value: "GPCS"; Production Value: "GPCS";;;;;;;;;;;;;;;;;;;;; php.ini Options ;;;;;;;;;;;;;;;;;;;;;; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini";user_ini.filename = ".user.ini"; To disable this feature set this option to empty value;user_ini.filename =; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes);user_ini.cache_ttl = 300;;;;;;;;;;;;;;;;;;;;; Language Options ;;;;;;;;;;;;;;;;;;;;;; Enable the PHP scripting language engine under Apache.; http://php.net/engineengine = On; This directive determines whether or not PHP will recognize code between; <? and ?> tags as PHP source which should be processed as such. It's been; recommended for several years that you not use the short tag "short cut" and; instead to use the full <?php and ?> tag combination. With the wide spread use; of XML and use of these tags by other languages, the server can become easily; confused and end up parsing the wrong code in the wrong context. But because; this short cut has been a feature for such a long time, it's currently still; supported for backwards compatibility, but we recommend you don't use them.; Default Value: On; Development Value: Off; Production Value: Off; http://php.net/short-open-tagshort_open_tag = Off; Allow ASP-style <% %> tags.; http://php.net/asp-tagsasp_tags = Off; The number of significant digits displayed in floating point numbers.; http://php.net/precisionprecision = 14; Enforce year 2000 compliance (will cause problems with non-compliant browsers); http://php.net/y2k-compliancey2k_compliance = On; Output buffering is a mechanism for controlling how much output data; (excluding headers and cookies) PHP should keep internally before pushing that; data to the client. If your application's output exceeds this setting, PHP; will send that data in chunks of roughly the size you specify.; Turning on this setting and managing its maximum buffer size can yield some; interesting side-effects depending on your application and web server.; You may be able to send headers and cookies after you've already sent output; through print or echo. You also may see performance benefits if your server is; emitting less packets due to buffered output versus PHP streaming the output; as it gets it. On production servers, 4096 bytes is a good setting for performance; reasons.; Note: Output buffering can also be controlled via Output Buffering Control; functions.; Possible Values:; On = Enabled and buffer is unlimited. (Use with caution); Off = Disabled; Integer = Enables the buffer and sets its maximum size in bytes.; Note: This directive is hardcoded to Off for the CLI SAPI; Default Value: Off; Development Value: 4096; Production Value: 4096; http://php.net/output-bufferingoutput_buffering = 4096; You can redirect all of the output of your scripts to a function. For; example, if you set output_handler to "mb_output_handler", character; encoding will be transparently converted to the specified encoding.; Setting any output handler automatically turns on output buffering.; Note: People who wrote portable scripts should not depend on this ini; directive. Instead, explicitly set the output handler using ob_start().; Using this ini directive may cause problems unless you know what script; is doing.; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"; and you cannot use both "ob_gzhandler" and "zlib.output_compression".; Note: output_handler must be empty if this is set 'On' !!!!; Instead you must use zlib.output_handler.; http://php.net/output-handler;output_handler =; Transparent output compression using the zlib library; Valid values for this option are 'off', 'on', or a specific buffer size; to be used for compression (default is 4KB); Note: Resulting chunk size may vary due to nature of compression. PHP; outputs chunks that are few hundreds bytes each as a result of; compression. If you prefer a larger chunk size for better; performance, enable output_buffering in addition.; Note: You need to use zlib.output_handler instead of the standard; output_handler, or otherwise the output will be corrupted.; http://php.net/zlib.output-compressionzlib.output_compression = Off; http://php.net/zlib.output-compression-level;zlib.output_compression_level = -1; You cannot specify additional output handlers if zlib.output_compression; is activated here. This setting does the same as output_handler but in; a different order.; http://php.net/zlib.output-handler;zlib.output_handler =; Implicit flush tells PHP to tell the output layer to flush itself; automatically after every output block. This is equivalent to calling the; PHP function flush() after each and every call to print() or echo() and each; and every HTML block. Turning this option on has serious performance; implications and is generally recommended for debugging purposes only.; http://php.net/implicit-flush; Note: This directive is hardcoded to On for the CLI SAPIimplicit_flush = Off; The unserialize callback function will be called (with the undefined class'; name as parameter), if the unserializer finds an undefined class; which should be instantiated. A warning appears if the specified function is; not defined, or if the function doesn't include/implement the missing class.; So only set this entry, if you really want to implement such a; callback-function.unserialize_callback_func =; When floats & doubles are serialized store serialize_precision significant; digits after the floating point. The default value ensures that when floats; are decoded with unserialize, the data will remain the same.serialize_precision = 17; This directive allows you to enable and disable warnings which PHP will issue; if you pass a value by reference at function call time. Passing values by; reference at function call time is a deprecated feature which will be removed; from PHP at some point in the near future. The acceptable method for passing a; value by reference to a function is by declaring the reference in the functions; definition, not at call time. This directive does not disable this feature, it; only determines whether PHP will warn you about it or not. These warnings; should enabled in development environments only.; Default Value: On (Suppress warnings); Development Value: Off (Issue warnings); Production Value: Off (Issue warnings); http://php.net/allow-call-time-pass-referenceallow_call_time_pass_reference = Off; Safe Mode; http://php.net/safe-modesafe_mode = Off; By default, Safe Mode does a UID compare check when; opening files. If you want to relax this to a GID compare,; then turn on safe_mode_gid.; http://php.net/safe-mode-gidsafe_mode_gid = Off; When safe_mode is on, UID/GID checks are bypassed when; including files from this directory and its subdirectories.; (directory must also be in include_path or full path must; be used when including); http://php.net/safe-mode-include-dirsafe_mode_include_dir =; When safe_mode is on, only executables located in the safe_mode_exec_dir; will be allowed to be executed via the exec family of functions.; http://php.net/safe-mode-exec-dirsafe_mode_exec_dir =; Setting certain environment variables may be a potential security breach.; This directive contains a comma-delimited list of prefixes. In Safe Mode,; the user may only alter environment variables whose names begin with the; prefixes supplied here. By default, users will only be able to set; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).; Note: If this directive is empty, PHP will let the user modify ANY; environment variable!; http://php.net/safe-mode-allowed-env-varssafe_mode_allowed_env_vars = PHP_; This directive contains a comma-delimited list of environment variables that; the end user won't be able to change using putenv(). These variables will be; protected even if safe_mode_allowed_env_vars is set to allow to change them.; http://php.net/safe-mode-protected-env-varssafe_mode_protected_env_vars = LD_LIBRARY_PATH; open_basedir, if set, limits all file operations to the defined directory; and below. This directive makes most sense if used in a per-directory; or per-virtualhost web server configuration file. This directive is; *NOT* affected by whether Safe Mode is turned On or Off.; http://php.net/open-basedir;open_basedir =; This directive allows you to disable certain functions for security reasons.; It receives a comma-delimited list of function names. This directive is; *NOT* affected by whether Safe Mode is turned On or Off.; http://php.net/disable-functionsdisable_functions =; This directive allows you to disable certain classes for security reasons.; It receives a comma-delimited list of class names. This directive is; *NOT* affected by whether Safe Mode is turned On or Off.; http://php.net/disable-classesdisable_classes =; Colors for Syntax Highlighting mode. Anything that's acceptable in; <span style="color: ???????"> would work.; http://php.net/syntax-highlighting;highlight.string = #DD0000;highlight.comment = #FF9900;highlight.keyword = #007700;highlight.bg = #FFFFFF;highlight.default = #0000BB;highlight.html = #000000; If enabled, the request will be allowed to complete even if the user aborts; the request. Consider enabling it if executing long requests, which may end up; being interrupted by the user or a browser timing out. PHP's default behavior; is to disable this feature.; http://php.net/ignore-user-abort;ignore_user_abort = On; Determines the size of the realpath cache to be used by PHP. This value should; be increased on systems where PHP opens many files to reflect the quantity of; the file operations performed.; http://php.net/realpath-cache-size;realpath_cache_size = 16k; Duration of time, in seconds for which to cache realpath information for a given; file or directory. For systems with rarely changing files, consider increasing this; value.; http://php.net/realpath-cache-ttl;realpath_cache_ttl = 120; Enables or disables the circular reference collector.; http://php.net/zend.enable-gczend.enable_gc = On;;;;;;;;;;;;;;;;;; Miscellaneous ;;;;;;;;;;;;;;;;;;; Decides whether PHP may expose the fact that it is installed on the server; (e.g. by adding its signature to the Web server header). It is no security; threat in any way, but it makes it possible to determine whether you use PHP; on your server or not.; http://php.net/expose-phpexpose_php = On;;;;;;;;;;;;;;;;;;;; Resource Limits ;;;;;;;;;;;;;;;;;;;;; Maximum execution time of each script, in seconds; http://php.net/max-execution-time; Note: This directive is hardcoded to 0 for the CLI SAPImax_execution_time = 30; Maximum amount of time each script may spend parsing request data. It's a good; idea to limit this time on productions servers in order to eliminate unexpectedly; long running scripts.; Note: This directive is hardcoded to -1 for the CLI SAPI; Default Value: -1 (Unlimited); Development Value: 60 (60 seconds); Production Value: 60 (60 seconds); http://php.net/max-input-timemax_input_time = 60; Maximum input variable nesting level; http://php.net/max-input-nesting-level;max_input_nesting_level = 64; How many GET/POST/COOKIE input variables may be accepted; max_input_vars = 1000; Maximum amount of memory a script may consume (128MB); http://php.net/memory-limitmemory_limit = 128M;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Error handling and logging ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; This directive informs PHP of which errors, warnings and notices you would like; it to take action for. The recommended way of setting values for this; directive is through the use of the error level constants and bitwise; operators. The error level constants are below here for convenience as well as; some common settings and their meanings.; By default, PHP is set to take action on all errors, notices and warnings EXCEPT; those related to E_NOTICE and E_STRICT, which together cover best practices and; recommended coding standards in PHP. For performance reasons, this is the; recommend error reporting setting. Your production server shouldn't be wasting; resources complaining about best practices and coding standards. That's what; development servers and development settings are for.; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This; means it pretty much reports everything which is exactly what you want during; development and early testing.;; Error Level Constants:; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0); E_ERROR - fatal run-time errors; E_RECOVERABLE_ERROR - almost fatal run-time errors; E_WARNING - run-time warnings (non-fatal errors); E_PARSE - compile-time parse errors; E_NOTICE - run-time notices (these are warnings which often result; from a bug in your code, but it's possible that it was; intentional (e.g., using an uninitialized variable and; relying on the fact it's automatically initialized to an; empty string); E_STRICT - run-time notices, enable to have PHP suggest changes; to your code which will ensure the best interoperability; and forward compatibility of your code; E_CORE_ERROR - fatal errors that occur during PHP's initial startup; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's; initial startup; E_COMPILE_ERROR - fatal compile-time errors; E_COMPILE_WARNING - compile-time warnings (non-fatal errors); E_USER_ERROR - user-generated error message; E_USER_WARNING - user-generated warning message; E_USER_NOTICE - user-generated notice message; E_DEPRECATED - warn about code that will not work in future versions; of PHP; E_USER_DEPRECATED - user-generated deprecation warnings;; Common Values:; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.); E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices); E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors); E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.); Default Value: E_ALL & ~E_NOTICE; Development Value: E_ALL | E_STRICT; Production Value: E_ALL & ~E_DEPRECATED; http://php.net/error-reportingerror_reporting = E_ALL & ~E_DEPRECATED; This directive controls whether or not and where PHP will output errors,; notices and warnings too. Error output is very useful during development, but; it could be very dangerous in production environments. Depending on the code; which is triggering the error, sensitive information could potentially leak; out of your application such as database usernames and passwords or worse.; It's recommended that errors be logged on production servers rather than; having the errors sent to STDOUT.; Possible Values:; Off = Do not display any errors; stderr = Display errors to STDERR (affects only CGI/CLI binaries!); On or stdout = Display errors to STDOUT; Default Value: On; Development Value: On; Production Value: Off; http://php.net/display-errorsdisplay_errors = Off; The display of errors which occur during PHP's startup sequence are handled; separately from display_errors. PHP's default behavior is to suppress those; errors from clients. Turning the display of startup errors on can be useful in; debugging configuration problems. But, it's strongly recommended that you; leave this setting off on production servers.; Default Value: Off; Development Value: On; Production Value: Off; http://php.net/display-startup-errorsdisplay_startup_errors = Off; Besides displaying errors, PHP can also log errors to locations such as a; server-specific log, STDERR, or a location specified by the error_log; directive found below. While errors should not be displayed on productions; servers they should still be monitored and logging is a great way to do that.; Default Value: Off; Development Value: On; Production Value: On; http://php.net/log-errorslog_errors =On; Set maximum length of log_errors. In error_log information about the source is; added. The default is 1024 and 0 allows to not apply any maximum length at all.; http://php.net/log-errors-max-lenlog_errors_max_len = 1024; Do not log repeated messages. Repeated errors must occur in same file on same; line unless ignore_repeated_source is set true.; http://php.net/ignore-repeated-errorsignore_repeated_errors = Off; Ignore source of message when ignoring repeated messages. When this setting; is On you will not log errors with repeated messages from different files or; source lines.; http://php.net/ignore-repeated-sourceignore_repeated_source = Off; If this parameter is set to Off, then memory leaks will not be shown (on; stdout or in the log). This has only effect in a debug compile, and if; error reporting includes E_WARNING in the allowed list; http://php.net/report-memleaksreport_memleaks = On; This setting is on by default.;report_zend_debug = 0; Store the last error/warning message in $php_errormsg (boolean). Setting this value; to On can assist in debugging and is appropriate for development servers. It should; however be disabled on production servers.; Default Value: Off; Development Value: On; Production Value: Off; http://php.net/track-errorstrack_errors = Off; Turn off normal error reporting and emit XML-RPC error XML; http://php.net/xmlrpc-errors;xmlrpc_errors = 0; An XML-RPC faultCode;xmlrpc_error_number = 0; When PHP displays or logs an error, it has the capability of inserting html; links to documentation related to that error. This directive controls whether; those HTML links appear in error messages or not. For performance and security; reasons, it's recommended you disable this on production servers.; Note: This directive is hardcoded to Off for the CLI SAPI; Default Value: On; Development Value: On; Production value: Off; http://php.net/html-errorshtml_errors = Off; If html_errors is set On PHP produces clickable error messages that direct; to a page describing the error or function causing the error in detail.; You can download a copy of the PHP manual from http://php.net/docs; and change docref_root to the base URL of your local copy including the; leading '/'. You must also specify the file extension being used including; the dot. PHP's default behavior is to leave these settings empty.; Note: Never use this feature for production boxes.; http://php.net/docref-root; Examples;docref_root = "/phpmanual/"; http://php.net/docref-ext;docref_ext = .html; String to output before an error message. PHP's default behavior is to leave; this setting blank.; http://php.net/error-prepend-string; Example:;error_prepend_string = "<span style='color: #ff0000'>"; String to output after an error message. PHP's default behavior is to leave; this setting blank.; http://php.net/error-append-string; Example:;error_append_string = "</span>"; Log errors to specified file. PHP's default behavior is to leave this value; empty.; http://php.net/error-log; Example:;error_log = php_errors.log; Log errors to syslog (Event Log on NT, not valid in Windows 95).;error_log = syslog;windows.show_crt_warning; Default value: 0; Development value: 0; Production value: 0;;;;;;;;;;;;;;;;;; Data Handling ;;;;;;;;;;;;;;;;;;; The separator used in PHP generated URLs to separate arguments.; PHP's default setting is "&".; http://php.net/arg-separator.output; Example:;arg_separator.output = "&"; List of separator(s) used by PHP to parse input URLs into variables.; PHP's default setting is "&".; NOTE: Every character in this directive is considered as separator!; http://php.net/arg-separator.input; Example:;arg_separator.input = ";&"; This directive determines which super global arrays are registered when PHP; starts up. If the register_globals directive is enabled, it also determines; what order variables are populated into the global space. G,P,C,E & S are; abbreviations for the following respective super globals: GET, POST, COOKIE,; ENV and SERVER. There is a performance penalty paid for the registration of; these arrays and because ENV is not as commonly used as the others, ENV is; is not recommended on productions servers. You can still get access to; the environment variables through getenv() should you need to.; Default Value: "EGPCS"; Development Value: "GPCS"; Production Value: "GPCS";; http://php.net/variables-ordervariables_order = "GPCS"; This directive determines which super global data (G,P,C,E & S) should; be registered into the super global array REQUEST. If so, it also determines; the order in which that data is registered. The values for this directive are; specified in the same manner as the variables_order directive, EXCEPT one.; Leaving this value empty will cause PHP to use the value set in the; variables_order directive. It does not mean it will leave the super globals; array REQUEST empty.; Default Value: None; Development Value: "GP"; Production Value: "GP"; http://php.net/request-orderrequest_order = "GP"; Whether or not to register the EGPCS variables as global variables. You may; want to turn this off if you don't want to clutter your scripts' global scope; with user data.; You should do your best to write your scripts so that they do not require; register_globals to be on; Using form variables as globals can easily lead; to possible security problems, if the code is not very well thought of.; http://php.net/register-globalsregister_globals = Off; Determines whether the deprecated long $HTTP_*_VARS type predefined variables; are registered by PHP or not. As they are deprecated, we obviously don't; recommend you use them. They are on by default for compatibility reasons but; they are not recommended on production servers.; Default Value: On; Development Value: Off; Production Value: Off; http://php.net/register-long-arraysregister_long_arrays = Off; This directive determines whether PHP registers $argv & $argc each time it; runs. $argv contains an array of all the arguments passed to PHP when a script; is invoked. $argc contains an integer representing the number of arguments; that were passed when the script was invoked. These arrays are extremely; useful when running scripts from the command line. When this directive is; enabled, registering these variables consumes CPU cycles and memory each time; a script is executed. For performance reasons, this feature should be disabled; on production servers.; Note: This directive is hardcoded to On for the CLI SAPI; Default Value: On; Development Value: Off; Production Value: Off; http://php.net/register-argc-argvregister_argc_argv = Off; When enabled, the SERVER and ENV variables are created when they're first; used (Just In Time) instead of when the script starts. If these variables; are not used within a script, having this directive on will result in a; performance gain. The PHP directives register_globals, register_long_arrays,; and register_argc_argv must be disabled for this directive to have any affect.; http://php.net/auto-globals-jitauto_globals_jit = On; Maximum size of POST data that PHP will accept.; http://php.net/post-max-sizepost_max_size = 8M; Magic quotes are a preprocessing feature of PHP where PHP will attempt to; escape any character sequences in GET, POST, COOKIE and ENV data which might; otherwise corrupt data being placed in resources such as databases before; making that data available to you. Because of character encoding issues and; non-standard SQL implementations across many databases, it's not currently; possible for this feature to be 100% accurate. PHP's default behavior is to; enable the feature. We strongly recommend you use the escaping mechanisms; designed specifically for the database your using instead of relying on this; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is; scheduled for removal in PHP 6.; Default Value: On; Development Value: Off; Production Value: Off; http://php.net/magic-quotes-gpcmagic_quotes_gpc = Off; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.; http://php.net/magic-quotes-runtimemagic_quotes_runtime = Off; Use Sybase-style magic quotes (escape ' with '' instead of \').; http://php.net/magic-quotes-sybasemagic_quotes_sybase = Off; Automatically add files before PHP document.; http://php.net/auto-prepend-fileauto_prepend_file =; Automatically add files after PHP document.; http://php.net/auto-append-fileauto_append_file =; By default, PHP will output a character encoding using; the Content-type: header. To disable sending of the charset, simply; set it to be empty.;; PHP's built-in default is text/html; http://php.net/default-mimetypedefault_mimetype = "text/html"; PHP's default character set is set to empty.; http://php.net/default-charset;default_charset = "iso-8859-1"; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is; to disable this feature.; http://php.net/always-populate-raw-post-data;always_populate_raw_post_data = On;;;;;;;;;;;;;;;;;;;;;;;;;; Paths and Directories ;;;;;;;;;;;;;;;;;;;;;;;;;;; UNIX: "/path1:/path2";include_path = ".:/php/includes";; Windows: "\path1;\path2";include_path = ".;c:\php\includes";; PHP's default setting for include_path is ".;/path/to/php/pear"; http://php.net/include-path; The root of the PHP pages, used only if nonempty.; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root; if you are running php as a CGI under any web server (other than IIS); see documentation for security issues. The alternate is to use the; cgi.force_redirect configuration below; http://php.net/doc-rootdoc_root =; The directory under which PHP opens the script using /~username used only; if nonempty.; http://php.net/user-diruser_dir =; Directory in which the loadable extensions (modules) reside.; http://php.net/extension-dir; extension_dir = "./"; On windows:; extension_dir = "ext"; Whether or not to enable the dl() function. The dl() function does NOT work; properly in multithreaded servers, such as IIS or Zeus, and is automatically; disabled on them.; http://php.net/enable-dlenable_dl = Off; cgi.force_redirect is necessary to provide security running PHP as a CGI under; most web servers. Left undefined, PHP turns this on by default. You can; turn it off here AT YOUR OWN RISK; **You CAN safely turn this off for IIS, in fact, you MUST.**; http://php.net/cgi.force-redirect;cgi.force_redirect = 1; if cgi.nph is enabled it will force cgi to always sent Status: 200 with; every request. PHP's default behavior is to disable this feature.;cgi.nph = 1; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape; (iPlanet) web servers, you MAY need to set an environment variable name that PHP; will look for to know it is OK to continue execution. Setting this variable MAY; cause security issues, KNOW WHAT YOU ARE DOING FIRST.; http://php.net/cgi.redirect-status-env;cgi.redirect_status_env = ;; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting; of zero causes PHP to behave as before. Default is 1. You should fix your scripts; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.; http://php.net/cgi.fix-pathinfo;cgi.fix_pathinfo=1; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate; security tokens of the calling client. This allows IIS to define the; security context that the request runs under. mod_fastcgi under Apache; does not currently support this feature (03/17/2002); Set to 1 if running under IIS. Default is zero.; http://php.net/fastcgi.impersonate;fastcgi.impersonate = 1;; Disable logging through FastCGI connection. PHP's default behavior is to enable; this feature.;fastcgi.logging = 0; cgi.rfc2616_headers configuration option tells PHP what type of headers to; use when sending HTTP response code. If it's set 0 PHP sends Status: header that; is supported by Apache. When this option is set to 1 PHP will send; RFC2616 compliant header.; Default is zero.; http://php.net/cgi.rfc2616-headers;cgi.rfc2616_headers = 0;;;;;;;;;;;;;;;;; File Uploads ;;;;;;;;;;;;;;;;;; Whether to allow HTTP file uploads.; http://php.net/file-uploadsfile_uploads = On; Temporary directory for HTTP uploaded files (will use system default if not; specified).; http://php.net/upload-tmp-dir;upload_tmp_dir =; Maximum allowed size for uploaded files.; http://php.net/upload-max-filesizeupload_max_filesize = 2M; Maximum number of files that can be uploaded via a single requestmax_file_uploads = 20;;;;;;;;;;;;;;;;;;; Fopen wrappers ;;;;;;;;;;;;;;;;;;;; Whether to allow the treatment of URLs (like http:// or ftp://) as files.; http://php.net/allow-url-fopenallow_url_fopen = On; Whether to allow include/require to open URLs (like http:// or ftp://) as files.; http://php.net/allow-url-includeallow_url_include = Off; Define the anonymous ftp password (your email address). PHP's default setting; for this is empty.; http://php.net/from;from="john@doe.com"; Define the User-Agent string. PHP's default setting for this is empty.; http://php.net/user-agent;user_agent="PHP"; Default timeout for socket based streams (seconds); http://php.net/default-socket-timeoutdefault_socket_timeout = 60upload_tmp_dir="C:\Windows\Temp"session.save_path="C:\Windows\Temp"error_log="C:\Windows\temp\php-errors.log"extension_dir="C:\PHP\ext"; If your scripts have to deal with files from Macintosh systems,; or you are running on a Mac and need to deal with files from; unix or win32 systems, setting this flag will cause PHP to; automatically detect the EOL character in those files so that; fgets() and file() will work regardless of the source of the file.; http://php.net/auto-detect-line-endings;auto_detect_line_endings = Off;;;;;;;;;;;;;;;;;;;;;;; Dynamic Extensions ;;;;;;;;;;;;;;;;;;;;;;;; If you wish to have an extension loaded automatically, use the following; syntax:;; extension=modulename.extension;; For example, on Windows:;; extension=msql.dll;; ... or under UNIX:;; extension=msql.so;; ... or with a path:;; extension=/path/to/extension/msql.so;; If you only provide the name of the extension, PHP will look for it in its; default extension directory.;; Windows Extensions; Note that ODBC support is built in, so no dll is needed for it.; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5); extension folders as well as the separate PECL DLL download (PHP 5).; Be sure to appropriately set the extension_dir directive.;; The MIBS data available in the PHP distribution must be installed. ; See http://www.php.net/manual/en/snmp.installation.php ;;;;;;;;;;;;;;;;;;;; Module Settings ;;;;;;;;;;;;;;;;;;;;[Date]; Defines the default timezone used by the date functions; http://php.net/date.timezonedate.timezone = GMT; http://php.net/date.default-latitude;date.default_latitude = 31.7667; http://php.net/date.default-longitude;date.default_longitude = 35.2333; http://php.net/date.sunrise-zenith;date.sunrise_zenith = 90.583333; http://php.net/date.sunset-zenith;date.sunset_zenith = 90.583333[filter]; http://php.net/filter.default;filter.default = unsafe_raw; http://php.net/filter.default-flags;filter.default_flags =[iconv];iconv.input_encoding = ISO-8859-1;iconv.internal_encoding = ISO-8859-1;iconv.output_encoding = ISO-8859-1[intl];intl.default_locale =; This directive allows you to produce PHP errors when some error; happens within intl functions. The value is the level of the error produced.; Default is 0, which does not produce any errors.;intl.error_level = E_WARNING[sqlite]; http://php.net/sqlite.assoc-case;sqlite.assoc_case = 0[sqlite3];sqlite3.extension_dir =[Pcre];PCRE library backtracking limit.; http://php.net/pcre.backtrack-limit;pcre.backtrack_limit=100000;PCRE library recursion limit.;Please note that if you set this value to a high number you may consume all;the available process stack and eventually crash PHP (due to reaching the;stack size limit imposed by the Operating System).; http://php.net/pcre.recursion-limit;pcre.recursion_limit=100000[Pdo]; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"; http://php.net/pdo-odbc.connection-pooling;pdo_odbc.connection_pooling=strict;pdo_odbc.db2_instance_name[Pdo_mysql]; If mysqlnd is used: Number of cache slots for the internal result set cache; http://php.net/pdo_mysql.cache_sizepdo_mysql.cache_size = 2000; Default socket name for local MySQL connects. If empty, uses the built-in; MySQL defaults.; http://php.net/pdo_mysql.default-socketpdo_mysql.default_socket=[Phar]; http://php.net/phar.readonly;phar.readonly = On; http://php.net/phar.require-hash;phar.require_hash = On;phar.cache_list =[Syslog]; Whether or not to define the various syslog variables (e.g. $LOG_PID,; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In; runtime, you can define these variables by calling define_syslog_variables().; http://php.net/define-syslog-variablesdefine_syslog_variables = Off[mail function]; For Win32 only.; http://php.net/smtpSMTP = localhost; http://php.net/smtp-portsmtp_port = 25; For Win32 only.; http://php.net/sendmail-from;sendmail_from = me@example.com; For Unix only. You may supply arguments as well (default: "sendmail -t -i").; http://php.net/sendmail-path;sendmail_path =; Force the addition of the specified parameters to be passed as extra parameters; to the sendmail binary. These parameters will always replace the value of; the 5th parameter to mail(), even in safe mode.;mail.force_extra_parameters =; Add X-PHP-Originating-Script: that will include uid of the script followed by the filenamemail.add_x_header = On; The path to a log file that will log all mail() calls. Log entries include; the full path of the script, line number, To address and headers.;mail.log =[SQL]; http://php.net/sql.safe-modesql.safe_mode = Off[ODBC]; http://php.net/odbc.default-db;odbc.default_db = Not yet implemented; http://php.net/odbc.default-user;odbc.default_user = Not yet implemented; http://php.net/odbc.default-pw;odbc.default_pw = Not yet implemented; Controls the ODBC cursor model.; Default: SQL_CURSOR_STATIC (default).;odbc.default_cursortype; Allow or prevent persistent links.; http://php.net/odbc.allow-persistentodbc.allow_persistent = On; Check that a connection is still valid before reuse.; http://php.net/odbc.check-persistentodbc.check_persistent = On; Maximum number of persistent links. -1 means no limit.; http://php.net/odbc.max-persistentodbc.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.; http://php.net/odbc.max-linksodbc.max_links = -1; Handling of LONG fields. Returns number of bytes to variables. 0 means; passthru.; http://php.net/odbc.defaultlrlodbc.defaultlrl = 4096; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.; See the documentation on odbc_binmode and odbc_longreadlen for an explanation; of odbc.defaultlrl and odbc.defaultbinmode; http://php.net/odbc.defaultbinmodeodbc.defaultbinmode = 1;birdstep.max_links = -1[Interbase]; Allow or prevent persistent links.ibase.allow_persistent = 1; Maximum number of persistent links. -1 means no limit.ibase.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.ibase.max_links = -1; Default database name for ibase_connect().;ibase.default_db =; Default username for ibase_connect().;ibase.default_user =; Default password for ibase_connect().;ibase.default_password =; Default charset for ibase_connect().;ibase.default_charset =; Default timestamp format.ibase.timestampformat = "%Y-%m-%d %H:%M:%S"; Default date format.ibase.dateformat = "%Y-%m-%d"; Default time format.ibase.timeformat = "%H:%M:%S"[MySQL]; Allow accessing, from PHP's perspective, local files with LOAD DATA statements; http://php.net/mysql.allow_local_infilemysql.allow_local_infile = On; Allow or prevent persistent links.; http://php.net/mysql.allow-persistentmysql.allow_persistent = On; If mysqlnd is used: Number of cache slots for the internal result set cache; http://php.net/mysql.cache_sizemysql.cache_size = 2000; Maximum number of persistent links. -1 means no limit.; http://php.net/mysql.max-persistentmysql.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.; http://php.net/mysql.max-linksmysql.max_links = -1; Default port number for mysql_connect(). If unset, mysql_connect() will use; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the; compile-time value defined MYSQL_PORT (in that order). Win32 will only look; at MYSQL_PORT.; http://php.net/mysql.default-portmysql.default_port =; Default socket name for local MySQL connects. If empty, uses the built-in; MySQL defaults.; http://php.net/mysql.default-socketmysql.default_socket =; Default host for mysql_connect() (doesn't apply in safe mode).; http://php.net/mysql.default-hostmysql.default_host =; Default user for mysql_connect() (doesn't apply in safe mode).; http://php.net/mysql.default-usermysql.default_user =; Default password for mysql_connect() (doesn't apply in safe mode).; Note that this is generally a *bad* idea to store passwords in this file.; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password"); and reveal this password! And of course, any users with read access to this; file will be able to reveal the password as well.; http://php.net/mysql.default-passwordmysql.default_password =; Maximum time (in seconds) for connect timeout. -1 means no limit; http://php.net/mysql.connect-timeoutmysql.connect_timeout = 60; Trace mode. When trace_mode is active (=On), warnings for table/index scans and; SQL-Errors will be displayed.; http://php.net/mysql.trace-modemysql.trace_mode = Off[MySQLi]; Maximum number of persistent links. -1 means no limit.; http://php.net/mysqli.max-persistentmysqli.max_persistent = -1; Allow accessing, from PHP's perspective, local files with LOAD DATA statements; http://php.net/mysqli.allow_local_infile;mysqli.allow_local_infile = On; Allow or prevent persistent links.; http://php.net/mysqli.allow-persistentmysqli.allow_persistent = On; Maximum number of links. -1 means no limit.; http://php.net/mysqli.max-linksmysqli.max_links = -1; If mysqlnd is used: Number of cache slots for the internal result set cache; http://php.net/mysqli.cache_sizemysqli.cache_size = 2000; Default port number for mysqli_connect(). If unset, mysqli_connect() will use; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the; compile-time value defined MYSQL_PORT (in that order). Win32 will only look; at MYSQL_PORT.; http://php.net/mysqli.default-portmysqli.default_port = 3306; Default socket name for local MySQL connects. If empty, uses the built-in; MySQL defaults.; http://php.net/mysqli.default-socketmysqli.default_socket =; Default host for mysql_connect() (doesn't apply in safe mode).; http://php.net/mysqli.default-hostmysqli.default_host =; Default user for mysql_connect() (doesn't apply in safe mode).; http://php.net/mysqli.default-usermysqli.default_user =; Default password for mysqli_connect() (doesn't apply in safe mode).; Note that this is generally a *bad* idea to store passwords in this file.; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw"); and reveal this password! And of course, any users with read access to this; file will be able to reveal the password as well.; http://php.net/mysqli.default-pwmysqli.default_pw =; Allow or prevent reconnectmysqli.reconnect = Off[mysqlnd]; Enable / Disable collection of general statistics by mysqlnd which can be; used to tune and monitor MySQL operations.; http://php.net/mysqlnd.collect_statisticsmysqlnd.collect_statistics = On; Enable / Disable collection of memory usage statistics by mysqlnd which can be; used to tune and monitor MySQL operations.; http://php.net/mysqlnd.collect_memory_statisticsmysqlnd.collect_memory_statistics = Off; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.; http://php.net/mysqlnd.net_cmd_buffer_size;mysqlnd.net_cmd_buffer_size = 2048; Size of a pre-allocated buffer used for reading data sent by the server in; bytes.; http://php.net/mysqlnd.net_read_buffer_size;mysqlnd.net_read_buffer_size = 32768[OCI8]; Connection: Enables privileged connections using external; credentials (OCI_SYSOPER, OCI_SYSDBA); http://php.net/oci8.privileged-connect;oci8.privileged_connect = Off; Connection: The maximum number of persistent OCI8 connections per; process. Using -1 means no limit.; http://php.net/oci8.max-persistent;oci8.max_persistent = -1; Connection: The maximum number of seconds a process is allowed to; maintain an idle persistent connection. Using -1 means idle; persistent connections will be maintained forever.; http://php.net/oci8.persistent-timeout;oci8.persistent_timeout = -1; Connection: The number of seconds that must pass before issuing a; ping during oci_pconnect() to check the connection validity. When; set to 0, each oci_pconnect() will cause a ping. Using -1 disables; pings completely.; http://php.net/oci8.ping-interval;oci8.ping_interval = 60; Connection: Set this to a user chosen connection class to be used; for all pooled server requests with Oracle 11g Database Resident; Connection Pooling (DRCP). To use DRCP, this value should be set to; the same string for all web servers running the same application,; the database pool must be configured, and the connection string must; specify to use a pooled server.;oci8.connection_class =; High Availability: Using On lets PHP receive Fast Application; Notification (FAN) events generated when a database node fails. The; database must also be configured to post FAN events.;oci8.events = Off; Tuning: This option enables statement caching, and specifies how; many statements to cache. Using 0 disables statement caching.; http://php.net/oci8.statement-cache-size;oci8.statement_cache_size = 20; Tuning: Enables statement prefetching and sets the default number of; rows that will be fetched automatically after statement execution.; http://php.net/oci8.default-prefetch;oci8.default_prefetch = 100; Compatibility. Using On means oci_close() will not close; oci_connect() and oci_new_connect() connections.; http://php.net/oci8.old-oci-close-semantics;oci8.old_oci_close_semantics = Off[PostgreSQL]; Allow or prevent persistent links.; http://php.net/pgsql.allow-persistentpgsql.allow_persistent = On; Detect broken persistent links always with pg_pconnect().; Auto reset feature requires a little overheads.; http://php.net/pgsql.auto-reset-persistentpgsql.auto_reset_persistent = Off; Maximum number of persistent links. -1 means no limit.; http://php.net/pgsql.max-persistentpgsql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit.; http://php.net/pgsql.max-linkspgsql.max_links = -1; Ignore PostgreSQL backends Notice message or not.; Notice message logging require a little overheads.; http://php.net/pgsql.ignore-noticepgsql.ignore_notice = 0; Log PostgreSQL backends Notice message or not.; Unless pgsql.ignore_notice=0, module cannot log notice message.; http://php.net/pgsql.log-noticepgsql.log_notice = 0[Sybase-CT]; Allow or prevent persistent links.; http://php.net/sybct.allow-persistentsybct.allow_persistent = On; Maximum number of persistent links. -1 means no limit.; http://php.net/sybct.max-persistentsybct.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.; http://php.net/sybct.max-linkssybct.max_links = -1; Minimum server message severity to display.; http://php.net/sybct.min-server-severitysybct.min_server_severity = 10; Minimum client message severity to display.; http://php.net/sybct.min-client-severitysybct.min_client_severity = 10; Set per-context timeout; http://php.net/sybct.timeout;sybct.timeout=;sybct.packet_size; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.; Default: one minute;sybct.login_timeout=; The name of the host you claim to be connecting from, for display by sp_who.; Default: none;sybct.hostname=; Allows you to define how often deadlocks are to be retried. -1 means "forever".; Default: 0;sybct.deadlock_retry_count=[bcmath]; Number of decimal digits for all bcmath functions.; http://php.net/bcmath.scalebcmath.scale = 0[browscap]; http://php.net/browscap;browscap = extra/browscap.ini[Session]; Handler used to store/retrieve data.; http://php.net/session.save-handlersession.save_handler = files; Argument passed to save_handler. In the case of files, this is the path; where data files are stored. Note: Windows users have to change this; variable in order to use PHP's session functions.;; The path can be defined as:;; session.save_path = "N;/path";; where N is an integer. Instead of storing all the session files in; /path, what this will do is use subdirectories N-levels deep, and; store the session data in those directories. This is useful if you; or your OS have problems with lots of files in one directory, and is; a more efficient layout for servers that handle lots of sessions.;; NOTE 1: PHP will not create this directory structure automatically.; You can use the script in the ext/session dir for that purpose.; NOTE 2: See the section on garbage collection below if you choose to; use subdirectories for session storage;; The file storage module creates files using mode 600 by default.; You can change that by using;; session.save_path = "N;MODE;/path";; where MODE is the octal representation of the mode. Note that this; does not overwrite the process's umask.; http://php.net/session.save-path;session.save_path = "/tmp"; Whether to use cookies.; http://php.net/session.use-cookiessession.use_cookies = 1; http://php.net/session.cookie-secure;session.cookie_secure =; This option forces PHP to fetch and use a cookie for storing and maintaining; the session id. We encourage this operation as it's very helpful in combatting; session hijacking when not specifying and managing your own session id. It is; not the end all be all of session hijacking defense, but it's a good start.; http://php.net/session.use-only-cookiessession.use_only_cookies = 1; Name of the session (used as cookie name).; http://php.net/session.namesession.name = PHPSESSID; Initialize session on request startup.; http://php.net/session.auto-startsession.auto_start = 0; Lifetime in seconds of cookie or, if 0, until browser is restarted.; http://php.net/session.cookie-lifetimesession.cookie_lifetime = 0; The path for which the cookie is valid.; http://php.net/session.cookie-pathsession.cookie_path = /; The domain for which the cookie is valid.; http://php.net/session.cookie-domainsession.cookie_domain =; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.; http://php.net/session.cookie-httponlysession.cookie_httponly =; Handler used to serialize data. php is the standard serializer of PHP.; http://php.net/session.serialize-handlersession.serialize_handler = php; Defines the probability that the 'garbage collection' process is started; on every session initialization. The probability is calculated by using; gc_probability/gc_divisor. Where session.gc_probability is the numerator; and gc_divisor is the denominator in the equation. Setting this value to 1; when the session.gc_divisor value is 100 will give you approximately a 1% chance; the gc will run on any give request.; Default Value: 1; Development Value: 1; Production Value: 1; http://php.net/session.gc-probabilitysession.gc_probability = 1; Defines the probability that the 'garbage collection' process is started on every; session initialization. The probability is calculated by using the following equation:; gc_probability/gc_divisor. Where session.gc_probability is the numerator and; session.gc_divisor is the denominator in the equation. Setting this value to 1; when the session.gc_divisor value is 100 will give you approximately a 1% chance; the gc will run on any give request. Increasing this value to 1000 will give you; a 0.1% chance the gc will run on any give request. For high volume production servers,; this is a more efficient approach.; Default Value: 100; Development Value: 1000; Production Value: 1000; http://php.net/session.gc-divisorsession.gc_divisor = 1000; After this number of seconds, stored data will be seen as 'garbage' and; cleaned up by the garbage collection process.; http://php.net/session.gc-maxlifetimesession.gc_maxlifetime = 1440; NOTE: If you are using the subdirectory option for storing session files; (see session.save_path above), then garbage collection does *not*; happen automatically. You will need to do your own garbage; collection through a shell script, cron entry, or some other method.; For example, the following script would is the equivalent of; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):; find /path/to/sessions -cmin +24 | xargs rm; PHP 4.2 and less have an undocumented feature/bug that allows you to; to initialize a session variable in the global scope, even when register_globals; is disabled. PHP 4.3 and later will warn you, if this feature is used.; You can disable the feature and the warning separately. At this time,; the warning is only displayed, if bug_compat_42 is enabled. This feature; introduces some serious security problems if not handled correctly. It's; recommended that you do not use this feature on production servers. But you; should enable this on development servers and enable the warning as well. If you; do not enable the feature on development servers, you won't be warned when it's; used and debugging errors caused by this can be difficult to track down.; Default Value: On; Development Value: On; Production Value: Off; http://php.net/session.bug-compat-42session.bug_compat_42 = Off; This setting controls whether or not you are warned by PHP when initializing a; session value into the global space. session.bug_compat_42 must be enabled before; these warnings can be issued by PHP. See the directive above for more information.; Default Value: On; Development Value: On; Production Value: Off; http://php.net/session.bug-compat-warnsession.bug_compat_warn = Off; Check HTTP Referer to invalidate externally stored URLs containing ids.; HTTP_REFERER has to contain this substring for the session to be; considered as valid.; http://php.net/session.referer-checksession.referer_check =; How many bytes to read from the file.; http://php.net/session.entropy-lengthsession.entropy_length = 0; Specified here to create the session id.; http://php.net/session.entropy-file; On systems that don't have /dev/urandom /dev/arandom can be used; On windows, setting the entropy_length setting will activate the ; Windows random source (using the CryptoAPI);session.entropy_file = /dev/urandom; Set to {nocache,private,public,} to determine HTTP caching aspects; or leave this empty to avoid sending anti-caching headers.; http://php.net/session.cache-limitersession.cache_limiter = nocache; Document expires after n minutes.; http://php.net/session.cache-expiresession.cache_expire = 180; trans sid support is disabled by default.; Use of trans sid may risk your users security.; Use this option with caution.; - User may send URL contains active session ID; to other person via. email/irc/etc.; - URL that contains active session ID may be stored; in publically accessible computer.; - User may access your site with the same session ID; always using URL stored in browser's history or bookmarks.; http://php.net/session.use-trans-sidsession.use_trans_sid = 0; Select a hash function for use in generating session ids.; Possible Values; 0 (MD5 128 bits); 1 (SHA-1 160 bits); This option may also be set to the name of any hash function supported by; the hash extension. A list of available hashes is returned by the hash_algos(); function.; http://php.net/session.hash-functionsession.hash_function = 0; Define how many bits are stored in each character when converting; the binary hash data to something readable.; Possible values:; 4 (4 bits: 0-9, a-f); 5 (5 bits: 0-9, a-v); 6 (6 bits: 0-9, a-z, A-Z, "-", ","); Default Value: 4; Development Value: 5; Production Value: 5; http://php.net/session.hash-bits-per-charactersession.hash_bits_per_character = 5; The URL rewriter will look for URLs in a defined set of HTML tags.; form/fieldset are special; if you include them here, the rewriter will; add a hidden <input> field with the info which is otherwise appended; to URLs. If you want XHTML conformity, remove the form entry.; Note that all valid entries require a "=", even if no value follows.; Default Value: "a=href,area=href,frame=src,form=,fieldset="; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"; http://php.net/url-rewriter.tagsurl_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"[MSSQL]; Allow or prevent persistent links.mssql.allow_persistent = On; Maximum number of persistent links. -1 means no limit.mssql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit.mssql.max_links = -1; Minimum error severity to display.mssql.min_error_severity = 10; Minimum message severity to display.mssql.min_message_severity = 10; Compatibility mode with old versions of PHP 3.0.mssql.compatability_mode = Off; Connect timeout;mssql.connect_timeout = 5; Query timeout;mssql.timeout = 60; Valid range 0 - 2147483647. Default = 4096.;mssql.textlimit = 4096; Valid range 0 - 2147483647. Default = 4096.;mssql.textsize = 4096; Limits the number of records in each batch. 0 = all records in one batch.;mssql.batchsize = 0; Specify how datetime and datetim4 columns are returned; On => Returns data converted to SQL server settings; Off => Returns values as YYYY-MM-DD hh:mm:ss;mssql.datetimeconvert = On; Use NT authentication when connecting to the servermssql.secure_connection = Off; Specify max number of processes. -1 = library default; msdlib defaults to 25; FreeTDS defaults to 4096;mssql.max_procs = -1; Specify client character set.; If empty or not set the client charset from freetds.conf is used; This is only used when compiled with FreeTDS;mssql.charset = "ISO-8859-1"[Assertion]; Assert(expr); active by default.; http://php.net/assert.active;assert.active = On; Issue a PHP warning for each failed assertion.; http://php.net/assert.warning;assert.warning = On; Don't bail out by default.; http://php.net/assert.bail;assert.bail = Off; User-function to be called if an assertion fails.; http://php.net/assert.callback;assert.callback = 0; Eval the expression with current error_reporting(). Set to true if you want; error_reporting(0) around the eval().; http://php.net/assert.quiet-eval;assert.quiet_eval = 0[COM]; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs; http://php.net/com.typelib-file;com.typelib_file =; allow Distributed-COM calls; http://php.net/com.allow-dcom;com.allow_dcom = true; autoregister constants of a components typlib on com_load(); http://php.net/com.autoregister-typelib;com.autoregister_typelib = true; register constants casesensitive; http://php.net/com.autoregister-casesensitive;com.autoregister_casesensitive = false; show warnings on duplicate constant registrations; http://php.net/com.autoregister-verbose;com.autoregister_verbose = true; The default character set code-page to use when passing strings to and from COM objects.; Default: system ANSI code page;com.code_page=[mbstring]; language for internal character representation.; http://php.net/mbstring.language;mbstring.language = Japanese; internal/script encoding.; Some encoding cannot work as internal encoding.; (e.g. SJIS, BIG5, ISO-2022-*); http://php.net/mbstring.internal-encoding;mbstring.internal_encoding = EUC-JP; http input encoding.; http://php.net/mbstring.http-input;mbstring.http_input = auto; http output encoding. mb_output_handler must be; registered as output buffer to function; http://php.net/mbstring.http-output;mbstring.http_output = SJIS; enable automatic encoding translation according to; mbstring.internal_encoding setting. Input chars are; converted to internal encoding by setting this to On.; Note: Do _not_ use automatic encoding translation for; portable libs/applications.; http://php.net/mbstring.encoding-translation;mbstring.encoding_translation = Off; automatic encoding detection order.; auto means; http://php.net/mbstring.detect-order;mbstring.detect_order = auto; substitute_character used when character cannot be converted; one from another; http://php.net/mbstring.substitute-character;mbstring.substitute_character = none;; overload(replace) single byte functions by mbstring functions.; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),; etc. Possible values are 0,1,2,4 or combination of them.; For example, 7 for overload everything.; 0: No overload; 1: Overload mail() function; 2: Overload str*() functions; 4: Overload ereg*() functions; http://php.net/mbstring.func-overload;mbstring.func_overload = 0; enable strict encoding detection.;mbstring.strict_detection = Off; This directive specifies the regex pattern of content types for which mb_output_handler(); is activated.; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml);mbstring.http_output_conv_mimetype=; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte; Default: "";mbstring.script_encoding=[gd]; Tell the jpeg decode to ignore warnings and try to create; a gd image. The warning will then be displayed as notices; disabled by default; http://php.net/gd.jpeg-ignore-warning;gd.jpeg_ignore_warning = 0[exif]; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.; With mbstring support this will automatically be converted into the encoding; given by corresponding encode setting. When empty mbstring.internal_encoding; is used. For the decode settings you can distinguish between motorola and; intel byte order. A decode setting cannot be empty.; http://php.net/exif.encode-unicode;exif.encode_unicode = ISO-8859-15; http://php.net/exif.decode-unicode-motorola;exif.decode_unicode_motorola = UCS-2BE; http://php.net/exif.decode-unicode-intel;exif.decode_unicode_intel = UCS-2LE; http://php.net/exif.encode-jis;exif.encode_jis =; http://php.net/exif.decode-jis-motorola;exif.decode_jis_motorola = JIS; http://php.net/exif.decode-jis-intel;exif.decode_jis_intel = JIS[Tidy]; The path to a default tidy configuration file to use when using tidy; http://php.net/tidy.default-config;tidy.default_config = /usr/local/lib/php/default.tcfg; Should tidy clean and repair output automatically?; WARNING: Do not use this option if you are generating non-html content; such as dynamic images; http://php.net/tidy.clean-outputtidy.clean_output = Off[soap]; Enables or disables WSDL caching feature.; http://php.net/soap.wsdl-cache-enabledsoap.wsdl_cache_enabled=1; Sets the directory name where SOAP extension will put cache files.; http://php.net/soap.wsdl-cache-dirsoap.wsdl_cache_dir="/tmp"; (time to live) Sets the number of second while cached file will be used; instead of original one.; http://php.net/soap.wsdl-cache-ttlsoap.wsdl_cache_ttl=86400; Sets the size of the cache limit. (Max. number of WSDL files to cache)soap.wsdl_cache_limit = 5[sysvshm]; A default size of the shared memory segment;sysvshm.init_mem = 10000[ldap]; Sets the maximum number of open links or -1 for unlimited.ldap.max_links = -1[mcrypt]; For more information about mcrypt settings see http://php.net/mcrypt-module-open; Directory where to load mcrypt algorithms; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt);mcrypt.algorithms_dir=; Directory where to load mcrypt modes; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt);mcrypt.modes_dir=[dba];dba.default_handler=[xsl]; Write operations from within XSLT are disabled by default.; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44; Set it to 0 to allow all operations;xsl.security_prefs = 44; Local Variables:; tab-width: 4; End:[PHP_BZ2]extension=php_bz2.dll[PHP_CURL]extension=php_curl.dll[PHP_GD2]extension=php_gd2.dll[PHP_GETTEXT]extension=php_gettext.dll[PHP_GMP]extension=php_gmp.dll[PHP_IMAP]extension=php_imap.dll[PHP_MBSTRING]extension=php_mbstring.dll[PHP_MYSQL]extension=php_mysql.dll[PHP_MYSQLI]extension=php_mysqli.dll[PHP_OPENSSL]extension=php_openssl.dll[PHP_PDO_MYSQL]extension=php_pdo_mysql.dll[PHP_PDO_ODBC]extension=php_pdo_odbc.dll[PHP_PDO_SQLITE]extension=php_pdo_sqlite.dll[PHP_PGSQL]extension=php_pgsql.dll[PHP_SOAP]extension=php_soap.dll[PHP_SOCKETS]extension=php_sockets.dll[PHP_SQLITE3]extension=php_sqlite3.dll[PHP_TIDY]extension=php_tidy.dll[PHP_XMLRPC]extension=php_xmlrpc.dll[PHP_EXIF]extension=php_exif.dll
RewriteEngine OnRewriteRule ^([^/]*)\/$ /game/index.php?action=$1 [L]RewriteRule ^showprofile/([^/]*)\.html$ /game/index.php?action=showprofile&profile=$1 [L]RewriteRule ^memberslist/([^/]*)\.html$ /game/index.php?action=memberslist&page=$1 [L]RewriteRule ^([^/]*)/([^/]*)\/$ /game/index.php?action=$1&cmd=$2 [L]RewriteRule ^browse/([^/]*)-([^/]*)\.html$ /game/index.php?action=browse&ID=$1&name=$2 [L]RewriteRule ^newest/page([^/]*)\.html$ /game/index.php?action=newest&page=$2 [L]RewriteRule ^blog/([^/]*)/([^/]*)/$ /game/index.php?action=blogcat&category=$1&page=$2 [L]RewriteRule ^blog/$ /game/index.php?action=blog [L]RewriteRule ^blogentry/entryid/([^/]*)/([^/]*)\.html$ /game/index.php?action=blogentry&entryid=$1&page=$2 [L]RewriteRule ^blogentry/submitcomment/$ /game/index.php?action=blogentry&cmd=submitcomment [L]RewriteRule ^blog/page/([^/]*)\.html$ /game/index.php?action=blog&page=$1 [L]RewriteRule ^showcomments/([^/]*)/([^/]*)/([^/]*)\.html$ /game/index.php?action=showcomments&name=$1&ID=$2&page=$3 [L]RewriteRule ^mostplayed/page([^/]*)\.html$ /game/index.php?action=newest&page=$2 [L]RewriteRule ^browse/([^-]*)-([^-]*)/page([^-]*)\.html$ /game/index.php?action=browse&ID=$1&name=$2&page=$3 [L]RewriteRule ^play/([^/]*)-([^/]*)\.html$ /game/index.php?action=play&ID=$1&name=$2 [L]RewriteRule ^pages/([^/]*)-([^/]*)\.html$ /game/index.php?action=page&entryid=$1&name=$2 [L]RewriteRule ^pages\/$ /game/index.php?action=pages [L]
PLEASE NOTE BEFORE INSSTALLING: This script is not set up to run from a subdirectory. It works best from the root directory of the domain, or subdomain. It can be run from asubdirectory, but you will need to edit to .htaccess file acordingly. You will need to add the directory path the the begining of the target URL on every line in the .htaccess file, or it will not work. Some have reported it to work by simply removing the "/" from the begining of each target URL, but this may not work for everybody. If you need help with this, ask for it in the support forums.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html><title><?php echo $pagetitle; ?></title><head><meta name="keywords" content="<?php echo $metatags; ?>" /><meta name="description" content="<?php echo $metadescription ; ?>" /><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"><link href="<?php $domain; ?>/templates/<?php echo $template ; ?>/styles.css" rel="stylesheet" type="text/css"><?phpinclude ("js/rating_update.php");?></head><body><table width="900" border="0" align="center" class="maintable" cellpadding="0" cellspacing="0"> <tr> <td colspan="3"> <img src="<?php echo $domain; ?>/templates/<?php echo $template ; ?>/images/banner.png" width="900"></img> <?php if (!$headerspace == "") { echo '<br><div align="center">'.$headerspace.'</div><br>'; }; echo ' <div class=\'menutop\'>'; if($seo_on == 1){ echo ' <ul> <li><a href=\''.$domain.'\' title=\'Home\'>Home</a></li> <li><a href=\''.$domain.'/mostplayed/\' title=\'Most Played\'>Most Played</a></li> <li><a href=\''.$domain.'/newest/\' title=\'Newest\'>Newest</a></li><li><a href="'.$domain.'/memberslist/" title="Member List">Member List</a></li> <li><a href=\''.$domain.'/search/\' title=\'Search\'>Search</a></li> <li><a href=\''.$domain.'/links/\' title=\'Links\'>Links</a></li> <li><a href=\''.$domain.'/fineprint/\' title=\'Fine Print\'>Fine Print</a></li> '; if(!isset($suserid)){ $mymenu1 = ' <li ><a href=\''.$domain.'/login/\'>Login</a></li> <li ><a href=\''.$domain.'/signup/\'>Signup</a></li>'; }else{ $mymenu1 = ' <li ><a href=\''.$domain.'/myaccount/\'>My Account</a></li> <li ><a href=\''.$domain.'/logout/\'>Logout</a></li>'; } if ($showpages == 1) { echo '<li><a href=\''.$domain.'/pages/\' title=\'pages\'>Pages</a></li>'; }; if ($showblog == 1) { echo '<li><a href=\''.$domain.'/blog/\' title=\'blog\'>Blog</a></li>'; }; echo ' </ul>'; }else{ echo ' <ul> <li><a href=\''.$domain.'\' title=\'Home\'>Home</a></li> <li><a href=\''.$domain.'/index.php?action=mostplayed\' title=\'Most Played\'>Most Played</a></li> <li><a href=\''.$domain.'/index.php?action=newest\' title=\'Newest\'>Newest</a></li><li><a href="'.$domain.'/memberslist/" title="Member List">Member List</a></li> <li><a href=\''.$domain.'/index.php?action=search\' title=\'Search\'>Search</a></li> <li><a href=\''.$domain.'/index.php?action=links\' title=\'Links\'>Links</a></li> <li><a href=\''.$domain.'/index.php?action=fineprint\' title=\'Fine Print\'>Fine Print</a></li> '; if(!isset($suserid)){ $mymenu1 = ' <li ><a href=\''.$domain.'/index.php?action=login\'>Login</a></li> <li ><a href=\''.$domain.'/index.php?action=signup\'>Signup</a></li>'; }else{ $mymenu1 = ' <li ><a href=\''.$domain.'/index.php?action=myaccount\'>My Account</a></li> <li ><a href=\''.$domain.'/index.php?action=logout\'>Logout</a></li>'; } if ($showpages == 1) { echo '<li ><a href=\''.$domain.'/index.php?action=pages\'>Pages</a></li>'; }; if ($showblog == 1) { echo '<li ><a href=\''.$domain.'/index.php?action=blog\'>Blog</a></li>'; }; echo ' </ul>'; } echo ' </div>'; ?> <br /> <br /> <br /> </td> </tr> <tr> <td valign="top" width="170" > <table width="170" > <tr> <td class="header2">Banner Exchanges</td> </tr> <tr> <td class="content2"><?php echo $bannersleft; ?></td> </tr> <tr> <td class="header2">My Menu</td> </tr> <tr> <td class="content2"> <?php echo '<ul class=\'catmenu\'>'; echo $mymenu1; if($usrdata['user_level'] == 2){echo '<li><a href=\''.$domain.'/index.php?action=admin\'>Admin</a></li>'; }; if($usrdata['gamelevel'] >= 2) {echo '<li><a href=\''.$domain.'/index.php?action=gameadmin\'>Game Admin</a></li>';}; if($usrdata['bloglevel'] >= 2) {echo '<li><a href=\''.$domain.'/index.php?action=blogadmin\'>Blog Admin</a></li>';}; echo '<p>'; submenu1(); echo '</ul>'; ?> </td> </tr> </table> <table width="100%"> <?php submenu2 (); ?> <tr> <td class="header2">Ads</td> </tr> <tr> <td class="content2"> <?php echo $ads1; ?><p> </td> </tr> </table> </td> <td valign="top" width="560"><?phpwritebody();?></td> <td valign="top" width="170"> <table width="170"> <tr> <td class="header2">Banner Exchanges</td> </tr> <tr> <td class="content2"> <?php echo $bannersright; ?> </td> </tr> <tr> <td class="header2">Ads</td> </tr> <tr> <td class="content2"> <?php echo $ads2; ?> </td> </tr> </table> <table width="100%"> <tr> <td class="header2">Links</td> </tr> <tr> <td class="content2" stlye="padding:5px'"> <?php $rlinkx2 = "SELECT * FROM dd_links where activate = '2' " ; $rlinkx1 = sqlcache('sitewidelinks', $cachelife, $rlinkx2); echo '<ul class=\'catmenu\'>'; foreach($rlinkx1 as $rlinkx){ echo '<li><a href=\''.$rlinkx['url'].'\'>'.$rlinkx['title'].'</a></li>'; } echo '</ul>'; ?> </td> </tr> <tr> <td class="content2" stlye="padding:5px'"> <!-- AddThis Button BEGIN --><a href="http://www.addthis.com/bookmark.php" onclick="addthis_url = location.href; addthis_title = document.title; return addthis_click(this);" target="_blank"><img src="http://s7.addthis.com/static/btn/lg-share-en.gif" width="125" height="16" border="0" alt="Bookmark and Share" /></a><script type="text/javascript">var addthis_pub = "sssox";</script><script type="text/javascript" src="http://s7.addthis.com/js/widget.php?v=10"></script> <!-- AddThis Button END --> </td> </tr> </table> <?php $totalgames = $db->num_rows($db->query(sprintf('SELECT ID FROM dd_games'))); $totalusers = $db->num_rows($db->query(sprintf('SELECT userid FROM dd_users'))); $totalcats = $db->num_rows($db->query(sprintf('SELECT ID FROM dd_categories'))); $totalcomments = $db->num_rows($db->query(sprintf('SELECT ID FROM dd_comments'))); $year = date('Y'); ?> <table width="100%"> <tr> <td class="header2">Stats</td> </tr> <tr> <td class="content2" style="padding:5px"> Total Games: <?php echo $totalgames; ?><br /> Total Users: <?php echo $totalusers; ?><br /> Total Categories: <?php echo $totalcats; ?><br /> Total Comments: <? echo $totalcomments; ?><br /> Total Hits: <?php include ("$directorypath/includes/counter.php"); ?><br /> Users Online: <? echo countusersonline(); ?><p> <a href="<?php echo $domain; ?>/rss-arcade.php"><img src="<? echo $domain; ?>/templates/default/images/rss.gif" border="0" ></img> RSS-Games</a><br /> <?php if ($showblog == 1) { echo '<a href="'.$domain.'/rss-blog.php"><img src="'.$domain.'/templates/default/images/rss.gif" border="0" ></img> RSS-Blog</a><br />' ; }; ?> </td> </tr> </table> <br /> </td> </tr></table><br /><div align="center"> <! -- Please do not remove the "powered by" link unless, you've purchased the removal. -- > <div align="center"> <?php echo "Copyright ".$sitename." © 2008-".date('Y'); ?> All Rights Reserved - Powered By <a href="http://www.freearcadescript.net" target="_blank">Free Arcade Script</a> - Rating mod by <a href="http://www.boedesign.com" target="_blank">boedesign.com</a></div> <Br /><?php echo $footerspace; ?></body></html>
